Rear Seat Buckle Side Belt Replacement (Crew Cab)

Rear Seat Buckle Side Belt Replacement (Crew Cab)

Removal Procedure




1. Remove the rear bench seat from the vehicle. Refer to Rear Bench Seat Replacement Rear Bench Seat Replacement.
2. Remove the grommet securing the rear seat belt buckle assembly to the seat.
3. Remove the rear seat belt buckle assembly from the seat cushion.

Installation Procedure




1. Install the rear bench seat in the vehicle. Refer to Rear Bench Seat Replacement Rear Bench Seat Replacement. Do not install the rear bench seat mounting nut.
2. Install the rear seat belt buckle through the seat cushion loop and position the seat belt buckle assembly over the rear bench seat mounting hole.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the rear bench seat mounting nut.

Tighten the rear bench seat mounting nut to 52.5 Nm (39 lb ft).