Driver or Passenger Seat Head Restraint Replacement
Courtesy of GENERAL MOTORS COMPANY Driver or Passenger Seat Head Restraint Replacement
| Callout |
Component Name |
| 1 |
Driver or Passenger Seat Head Restraint Procedure
- Lower the seat back rearward to gain space between the head restraint and the roof.
- Raise the headrest to the full upward position.
- Depress the large button on the head restraint guide and raise the head restraint to the full up position.
- Depress the smaller button on the opposite head restraint guide and pull upward to remove from the seat.
|