Hood Rear Weatherstrip Replacement

Fig 1: Hood Rear Weatherstrips

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hood Rear Weatherstrip- Left Procedure Clean the area where the weatherstrip will be mounted. Use a suitable solvent with a mixture of 50 percent isopropyl alcohol and 50 percent water by volume, or high flash naphtha.
2	Hood Rear Weatherstrip- Right Procedure Clean the area where the weatherstrip will be mounted. Use a suitable solvent with a mixture of 50 percent isopropyl alcohol and 50 percent water by volume, or high flash naphtha.