LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Headlamp Bulb Replacement (SS HID)

Headlamp Bulb Replacement (SS HID)

Fig 1: Headlamp Bulb & Accessory Cover (SS HID)
GM2264468Courtesy of GENERAL MOTORS COMPANY
Headlamp Bulb Replacement (SS HID)

Callout Component Name
WARNING:

The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

  • Never open the high intensity discharge system ballast or the arc tube assembly starter.
  • Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
WARNING:

The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Preliminary Procedure Open and support the hood in order to access the headlamp bulb accessory covers and bulb sockets.
1 Headlamp Bulb Accessory Cover
TIP:  Rotate the cover counter-clockwise and remove.
2 Headlamp Bulb

Procedure

  1. Disconnect the headlamp bulb electrical connector.
  2. Rotate the lock ring 1/4 turn counter-clockwise.
  3. Pull the HID lamp from the headlamp assembly.
scientia non olet · About LEMON Manuals