LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Engine Oil Pressure Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the engine oil pressure indicator turns on & off when commanding the All Indicators ON and OFF with a scan tool.
    • If the engine oil pressure Indicator does not turn on and off. 

      Replace the P16 Instrument Cluster.

    • If the engine oil pressure Indicator turns on and off 
  3. Verify the scan tool Engine Oil Pressure Switch parameter is Low.
    • If Low 
  4. Engine running.
  5. Verify the scan tool Engine Oil Pressure Switch parameter is OK.
    • If OK 
  6. All OK.
scientia non olet · About LEMON Manuals