Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Control Arm Nut | ||
|
50 N.m | 37 lb ft |
|
plus 150 degrees | |
| Front Lower Control Arm Nut at the Steering Knuckle | ||
|
40 N.m | 30 lb ft |
|
plus 90 degrees | |
| Front Lower Rear Control Arm Nut at the Steering Knuckle | ||
|
40 N.m | 30 lb ft |
|
plus 90 degrees | |
| Front Lower Rear Control Arm Nut at the Frame | ||
|
50 N.m | 37 lb ft |
|
plus 120 degrees | |
| Front Stabilizer Shaft Link Nut at the Front Strut | 70 N.m | 52 lb ft |
| Front Stabilizer Shaft Link Nut at the Stabilizer Shaft | 50 N.m | 37 lb ft |
| Front Stabilizer Shaft Insulator Clamp Nuts | 43 N.m | 32 lb ft |
| Front Suspension Strut Bolts at the Steering Knuckle | ||
|
80 N.m | 59 lb ft |
|
plus 180 degrees | |
| Front Suspension Strut Nut at the Front Suspension Strut Mounting Plate | 70 N.m | 52 lb ft |
| Front Suspension Strut Nut at the Front Suspension Strut Insulator | 70 N.m | 52 lb ft |
| Front Wheel Bearing/Hub Bolts (LFX) | 115 N.m | 85 lb ft |
| Front Wheel Bearing/Hub Bolts (LSA, LS3, L99) | ||
|
100 N.m | 74 lb ft |
|
plus 28 degrees | |