Front Wheel Bearing and Hub Replacement

Fig 1: Front Wheel Bearing and Hub

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation . Remove the wheel speed sensor. Refer to Front Wheel Speed Sensor Replacement . Remove the wheel drive shaft from the vehicle. Refer to Front Wheel Drive Shaft Replacement .
1	Front wheel Hub Bolt (Qyt: 3) CAUTION: Refer to Fastener Caution . Procedure: Remove and discard the bolt and replace with NEW only. Tighten: First Pass: 100 N.m (74 lb ft). Final Pass: additional 60 degrees.
2	Front Wheel Hub.
3	Front Brake Shield