Engine Oil Pressure Indicator Switch Replacement

Fig 1: Engine Oil Pressure Indicator Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Engine Oil Pressure Sensor and/or Switch CAUTION: Refer to Component Fastener Tightening Caution . Procedure Disconnect the oil pressure sensor electrical connector. Transfer components as necessary. Tighten: 20 N.m (15 lb ft)

Callout

Component Name

Preliminary Procedure:
Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement

Engine Oil Pressure Sensor and/or Switch

CAUTION: Refer to Component Fastener Tightening Caution .

Procedure

Tighten: 20 N.m (15 lb ft)