LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Traverse AWD V6-3.6L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Collision Avoidance and Parking Assist Systems >> Diagrams >> Diagnostic Aids >> General Electrical Diagnostic Procedures >> Connector Repairs >> FEP Connectors

FEP Connectors




FEP Connectors

Removal Procedure




1. Use a small flat-bladed tool to release the locking tab on the connector.




2. Push down the locking tab to release the connector. The small flat-bladed tool may need to be pushed down and angled back slightly to depress the locking tab. Pull on the connector body while releasing the locking tab to disconnect the connector.

scientia non olet · About LEMON Manuals