Oil Level Indicator and Tube Removal
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil level indicator (418) from the tube.
- Remove the oil level indicator tube bolt (419).
- Remove the oil level indicator tube (420) from the engine block.
- Remove the O-ring (421) from the tube, as required.
IMPORTANT:
Inspect the O-ring for cuts or damage. The O-ring seal may be used again if it is not cut or damaged.