LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban K2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1763 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Housing Removal

Crankshaft Rear Oil Seal Housing Removal

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Housing, Gasket And Seal
    GM1552544Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear oil seal housing bolts (517).
  2. Remove the housing (518) and gasket (519).
  3. Remove the rear oil seal (141).
scientia non olet · About LEMON Manuals