LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban K2500 >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System - Greater Than Or Equal To 3900 Kg (8600 Lb) GVW >> Diagnostic Information and Procedures >> DTC C0186 or C0196 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, using a scan tool, clear the DTC.
  2. Test drive the vehicle while observing the scan tool Yaw Rate and Lateral Accelerometer Sensor parameter. The parameters should vary as the vehicle changes directions.
    • If the parameters are locked or erratic, refer to Circuit/System Testing below.
scientia non olet · About LEMON Manuals