Front Side Door Roof Drip Weatherstrip Replacement (Regular Cab)

Fig 1: Front Side Door Roof Drip Weatherstrip (Regular Cab)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Side Door Roof Drip Weatherstrip Procedure Open the door to the full open position. Remove all of the old roof drip weatherstrip tape and retainers from around the door opening. Clean the area where the roof drip weatherstrip is going to be applied, using a 50-50 mixture of isopropyl alcohol and water. Wipe the surface using a clean cloth while the solvent is still wet. Allow the surface to fully dry. Do not touch the adhesive backing surface, remove the protective adhesive backing material from the roof drip weatherstrip. Start the roof drip weatherstrip in the rear upper corner of the door opening. Work the roof drip weatherstrip around the edge of the door opening installing the roof drip weatherstrip and retainers. NOTE: Use the appropriate tool to remove the roof drip weatherstrip retainers.

Callout

Component Name

Front Side Door Roof Drip Weatherstrip

Procedure

Open the door to the full open position.
Remove all of the old roof drip weatherstrip tape and retainers from around the door opening.
Clean the area where the roof drip weatherstrip is going to be applied, using a 50-50 mixture of isopropyl alcohol and water.
Wipe the surface using a clean cloth while the solvent is still wet. Allow the surface to fully dry.
Do not touch the adhesive backing surface, remove the protective adhesive backing material from the roof drip weatherstrip.
Start the roof drip weatherstrip in the rear upper corner of the door opening.
Work the roof drip weatherstrip around the edge of the door opening installing the roof drip weatherstrip and retainers.

NOTE:

Use the appropriate tool to remove the roof drip weatherstrip retainers.