LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Air Conditioning Compressor Bracket Replacement (HP2)

Air Conditioning Compressor Bracket Replacement (HP2)

Fig 1: Air Conditioning Compressor Bracket (HP2)
GM1971988Courtesy of GENERAL MOTORS CORP.
Air Conditioning Compressor Bracket Replacement (HP2)

Callout Component Name

Preliminary Procedures

  1. Remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement (HP2) , Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92, LC9 and LMG) .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the engine shield. Refer to Engine Shield Replacement .
  4. Remove the oil pan slid plate. Refer to Oil Pan Skid Plate Replacement (1500 with RPO NZZ) , Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) .
  5. Remove transmission cooler bracket.
1 A/C Compressor Bracket Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 A/C Compressor Bracket Bolt (Qty: 2)
Tighten 
50 N.m (37 lb ft)
3 A/C Compressor Bracket Bolt (Qty: 3)
Tighten 
50 N.m (37 lb ft)
4 A/C Compressor Bracket
scientia non olet · About LEMON Manuals