LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case - Mp 3010-NP0) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Holding Fixture Installation

Transfer Case Holding Fixture Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Transfer Case Holding Fixture
GM1849343Courtesy of GENERAL MOTORS CORP.
Transfer Case Holding Fixture Installation

Callout Component Name
1 Transfer Case Nuts
Special Tools 
J 45759  Assembly Fixture
For equivalent regional tools, refer to Special Tools .
2 Transfer Case
Special Tools 
J 3289-20  Holding Fixture
3 Pivot Pin
  • Always secure with the pivot pin after rotating.
  • The transfer case can be rotated 360 degrees to facilitate repair.