Front Output Shaft Assembly, Drive Chain, Actuator Shaft Gear, and Oil Pump Suction Pipe Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Front Output Shaft Assembly, Drive Chain, Actuator Shaft Gear And Oil Pump Suction Pipe

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Front Output Shaft Drive Chain Assembly Procedure Install the chain with darkened links up onto the shaft.
2	Transfer Case Front Output Shaft Assembly Procedure Install the front output shaft and chain assembly into the front case half while engaging the chain with the drive sprocket.
3	Transfer Case Actuator Shaft Gear
4	Transfer Case Oil Pump Suction Pipe Seal Use a NEW seal. Lubricate the seal to ease installation. Install the seal to the pipe prior to inserting the pipe into the pump.
5	Transfer Case Oil Pump Suction Pipe