Clutch Pressure Plate Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Clutch Pressure Plate

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Control Actuator Lever Washer
2	Transfer Case Four Wheel Drive Clutch Pressure - Apply - Plate
3	Transfer Case Four Wheel Drive Clutch Pressure Plate Spring (Qty: 4)
4	Transfer Case Four Wheel Drive Clutch Pressure Plates
5	Transfer Case Four Wheel Drive Clutch Hub
6	Transfer Case Four Wheel Drive Clutch Shim
7	Transfer Case Two/Four Wheel Drive Clutch Retaining Ring TIP: The Transfer Case High/Low Clutch Reset must be performed after the transfer case is installed in the vehicle.