2-3-4 Clutch Disassemble

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 2-3-4 Clutch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Hybrid Direct, 2-3-4 Clutch Piston Ring Use DT 47867 and press to remove the 2-3-4 piston and spring. Discard the retaining ring. It is not reusable. Special Tool DT 47867 Adjustable Clutch Spring Compressor
2	Hybrid Direct, 2-3-4 Clutch Piston Dam
3	Hybrid Direct, 2-3-4 Clutch Piston Return Spring TIP: Use DT 47867 and press to remove the 2-3-4 piston and spring.
4	Hybrid Direct, 2-3-4 Clutch Piston Outer Seal
5	Hybrid Direct, 2-3-4 Clutch Piston
6	Hybrid Direct, 2-3-4 Clutch Piston Inner Seal