LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Engine Controls And Fuel - Hybrid (LZ1) - Repair Instructions) >> Repair Instructions >> Auxiliary Evaporative Emission Canister Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Auxiliary EVAP Canister
    GM1965658Courtesy of GENERAL MOTORS CORP.
  1. Install the auxiliary EVAP canister (1) to the vehicle.
    2. Fig 2: Auxiliary EVAP Canister Nuts
    GM1965655Courtesy of GENERAL MOTORS CORP.
  2. Install the auxiliary EVAP canister nuts (1).
    3. Fig 3: Quick Connect Fittings
    GM1964762Courtesy of GENERAL MOTORS CORP.
  3. Connect the EVAP pipe quick connect fitting (3) to the auxiliary EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the EVAP canister vent solenoid valve. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement .
scientia non olet · About LEMON Manuals