LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1748 (Automatic Transmission - 2ML70 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Pipe Fitting Seal Replacement

Transmission Fluid Cooler Pipe Fitting Seal Replacement

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Fluid Cooler Pipe Fitting Seal
GM1970145Courtesy of GENERAL MOTORS CORP.
Transmission Fluid Cooler Pipe Fitting Seal Replacement

Callout Component Name

Preliminary Procedures

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transmission fluid cooler pipes from the transmission. Refer to Transmission Fluid Cooler Pipe Replacement .
1 Trans Fluid Cooler Pipe Fitting Seal (Qty: 2)

Special Tools