Manual Shift Shaft Seal Replacement
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Manual Shift Shaft Seal Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the manual shift shaft position switch. Refer to Manual Shift Shaft Position Switch Replacement . |
|
| 1 | Manual Shift Shaft Seal
CAUTION:
Do not damage the case bore during removal of the manual shift shaft seal.
CAUTION:
When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result. TIP: Always install a NEW seal into the case. Special Tools |