LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Antilock Brake System - Hybrid (Hp2)) >> Diagnostic Information and Procedures >> DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no other DTCs are set.
  2. Using a scan tool, perform the EBCM, module setup, and EBCM Relearn.
  3. Verify that DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE is not set.
    • If DTC is set replace brake pressure modulator valve (BPMV) assembly. If the DTC resets, replace the EBCM.
scientia non olet · About LEMON Manuals