LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Antilock Brake System - Hybrid (Hp2)) >> Diagnostic Information and Procedures >> DTC C012A, C128B, C128E, or C12B2-C12B4 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a scan tool, perform the EBCM, Module Setup, EBCM Relearn.
  2. Verify that DTC C012A, C128B, C128E, C12B2, C12B3, or C12B4 is not set.
    • If the DTC is set replace brake pressure modulator valve assembly. If the DTC resets, replace EBCM.
scientia non olet · About LEMON Manuals