LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Inlet Hose Replacement (Non-HP2)

Radiator Inlet Hose Replacement (Non-HP2)

Fig 1: Radiator Inlet Hose (Non-HP2)
GM1684158Courtesy of GENERAL MOTORS CORP.
Radiator Inlet Hose Replacement (Non-HP2)

Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1 Radiator Inlet Hose
  • Remove the radiator vent hose from the radiator inlet hose clips.
  • Using J 38185 reposition the radiator inlet hose clamps.