Instrument Cluster Replacement (Cadillac)

Fig 1: Instrument Cluster (Cadillac)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel cluster trim plate bezel. Refer to Instrument Cluster Trim Panel Replacement (Cadillac) .
1	Instrument Panel Cluster Assembly Bolts/Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Disconnect electrical connections. A replacement cluster must be programmed. Refer to Control Module References .