Rear Upper Garnish Molding Replacement (Avalanche/Escalade EXT)

Fig 1: Rear Upper Garnish Molding (Avalanche/Escalade EXT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove rear window from the vehicle. Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) , Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) , Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
1	Headliner Trim Panel Molding Retainer (Qty: 7)
2	Headliner Trim Panel Molding Assembly TIP: Disconnect electrical connector.

Callout

Component Name

Preliminary Procedures

Headliner Trim Panel Molding Retainer (Qty: 7)

Headliner Trim Panel Molding Assembly
TIP: Disconnect electrical connector.