LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Endgate Weatherstrip Replacement

Endgate Weatherstrip Replacement

Fig 1: Endgate Weatherstrip
GM1817768Courtesy of GENERAL MOTORS CORP.
Endgate Weatherstrip Replacement

Callout Component Name
1 Endgate Weatherstrip
  1. Seat and align the weatherstrip carrier end left to top of flange left side.
  2. Seat and align the weatherstrip carrier end right to top of flange right side.
  3. Load the weatherstrip center flush with the center of the flange.
  4. Stuff and set remaining weatherstrip working downward and inward toward the center.
scientia non olet · About LEMON Manuals