LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Suburban C2500 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Cargo Box Stowage Box Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Body Side Inner Panel Bolts And Cargo Box/Stowage Box
    GM1708945Courtesy of GENERAL MOTORS CORP.
    CAUTION:

    Refer to Fastener Caution .

  1. Install the cargo box stowage box (2) to the vehicle and tighten to 9 N.m (80 lb in).
  2. Install the cargo tie-down rings and bolts to the body side inner panel and tighten to 9 N.m (80 lb in).
  3. Install the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement .
  4. Install the lamp socket to the pickup box side courtesy lamp assembly.
  5. Install the assist handle. Refer to Cargo Box Stowage Box Handle Replacement (Avalanche) .
  6. Install the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
scientia non olet · About LEMON Manuals