Oil Pan Skid Plate Replacement

Oil Pan Skid Plate Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Remove the mounting bolts for the oil pan skid plate.
3. Remove the oil pan skid plate.

Installation Procedure




1. Position the oil pan skid plate on the frame.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the oil skid plate mounting bolts and tighten to 28 Nm (21 lb ft).
3. Lower the vehicle.