Rear Crankshaft Main Bearing Seal: Service and Repair

Crankshaft Rear Oil Seal Replacement

Removal Procedure

1. Remove the flywheel. Refer to Engine Flywheel Replacement (Service and Repair).
2. Remove the crankshaft rear oil seal. Refer to Crankshaft Rear Oil Seal Removal (32. Crankshaft Rear Oil Seal Removal).

Installation Procedure

1. Install the rear main seal. Refer to Crankshaft Rear Oil Seal Installation (74. Crankshaft Rear Oil Seal Installation).
2. Install the engine flywheel. Refer to Engine Flywheel Replacement (Service and Repair).