LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5)) >> Off-Vehicle Repair Instructions - Part 2 >> Cylinder Head Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove any old thread sealant, gasket material or sealant using J 28410  .
  2. Clean all cylinder head surfaces with non-corrosive solvent.
    3. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  3. Blow out all the oil galleries using compressed air.
  4. Remove any carbon deposits from the combustion chambers using the J 8358  .
  5. Clean any debris or build-up from the lifter pockets.
scientia non olet · About LEMON Manuals