LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 4T65-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Pressure Control Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the case side cover. Refer to Control Valve Body Cover Replacement .
  2. Disconnect the pressure control solenoid (PCS) electrical connector.
  3. Remove the PCS retaining clip (314E).
  4. Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  5. Remove the PCS (322).