LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 4T65-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> 1-2 or 2-3 Accumulator Piston Assembly and Manual 2-1 Band Servo Piston Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
    3. Fig 1: Identifying Accumulator & Manual 2-1 Band Servo Cover Bolts
    GM164809Courtesy of GENERAL MOTORS CORP.
  3. Remove the accumulator bolts (131).
  4. Remove the manual 2-1 band servo cover bolts (103).
    5. Fig 2: View Of Accumulator Assembly
    GM97365Courtesy of GENERAL MOTORS CORP.
  5. Remove the accumulator assembly.
    6. Fig 3: View Of Manual 2-1 Band Servo
    GM164811Courtesy of GENERAL MOTORS CORP.
  6. Remove the manual 2-1 band servo (106-116).
scientia non olet · About LEMON Manuals