LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 4T65-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> 1-2 Shift Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the case side cover. Refer to Control Valve Body Cover Replacement .
  2. Disconnect the 1-2 shift solenoid electrical connector.
  3. Remove the 1-2 shift solenoid retaining clip (314D)
    4. Fig 1: Identifying 1-2 Shift Solenoid
    GM49377Courtesy of GENERAL MOTORS CORP.
  4. Remove the 1-2 shift solenoid (315A).
scientia non olet · About LEMON Manuals