Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
- Disconnect the positive crankcase ventilation (PCV) fresh air tube from the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
- Remove the PCV fresh air tube from the rocker arm cover.
- Remove the PCV fresh air tube from the vehicle.
- Disconnect the PCV foul air tube from the PCV valve. Refer to Plastic Collar Quick Connect Fitting Service .
- Remove the PCV foul air tube from the intake manifold.
- Remove the PCV foul air tube from the vehicle.