LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 3.5L - Repair Instructions - On Vehicle) >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Oil Level Indicator & Tube
    GM1581866Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator.
  2. Remove the oil level indicator tube bracket bolt.
  3. Remove the oil level indicator tube.
  4. Inspect the oil level indicator tube O-ring seal, for damage, replace as necessary.
scientia non olet · About LEMON Manuals