LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 3.5L - Repair Instructions - On Vehicle) >> Intake Manifold Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Oil Fill Cap
    GM1607915Courtesy of GENERAL MOTORS CORP.
  1. Align the cover to the studs on the engine, push down on the cover above the studs in order to engage the cover to the studs.
  2. Install the engine oil fill cap.
scientia non olet · About LEMON Manuals