LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 3.5L - Repair Instructions - On Vehicle) >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Thread Forcing Bolt With Bearing
    GM2047119Courtesy of GENERAL MOTORS CORP.
  1. Align the EN-48869:  installer and the crankshaft front oil seal with the engine front cover and crankshaft.
  2. Install the crankshaft front oil seal using EN-48869:  installer and a suitable tool.
  3. Install the crankshaft key into the keyway.
  4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals