LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 3.5L - Repair Instructions - On Vehicle) >> Camshaft Rear Bearing Hole Plug Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Camshaft Rear Bearing Hole Plug
    GM105921Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine flywheel. Refer to Engine Flywheel Replacement .
  2. Remove the camshaft rear bearing hole plug.
scientia non olet · About LEMON Manuals