LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 3.5L - Repair Instructions - Off Vehicle (2 Of 3)) >> Valve Lifter Installation

Valve Lifter Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Valve Lifters & Lifter Guides
    GM54701Courtesy of GENERAL MOTORS CORP.
  1. Coat the valve lifters using prelube. Refer to Adhesives, Fluids, Lubricants, and Sealers for recommended lubricant.
  2. Install the valve lifters in their original locations.
  3. Apply threadlock to the threads. Refer to Adhesives, Fluids, Lubricants, and Sealers for recommended threadlock.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the valve lifter guides and guide bolts, and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals