LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Engine Mechanical - 3.5L - Repair Instructions - Off Vehicle (3 Of 3)) >> Engine Mount Support and Strut Bracket Installation

Engine Mount Support and Strut Bracket Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Mount Support & Strut Bracket Bolts
    GM1645437Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount support and strut bracket and bracket bolts.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the bolts and tighten to 50 N.m (37 lb ft).
scientia non olet · About LEMON Manuals