LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 4T65-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Torque Converter Assembly Removal

Torque Converter Assembly Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Torque Converter Assembly
    GM47958Courtesy of GENERAL MOTORS CORP.
    WARNING: The torque converter weighs approximately 35 lbs. Personal injury may result if you lift the torque converter improperly.
  1. Remove the torque converter assembly (1).
    2. Fig 2: Identifying Turbine Shaft O-Ring Seal
    GM10484Courtesy of GENERAL MOTORS CORP.
  2. Remove the turbine shaft O-ring seal (520).
scientia non olet · About LEMON Manuals