LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 4T65-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Input and Reaction Carrier Removal

Input and Reaction Carrier Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Input Carrier Assembly
    GM893323Courtesy of GENERAL MOTORS CORP.
  1. Position the transmission so that the case cover joint is facing upward.
  2. Remove the input carrier assembly (672).
    3. Fig 2: View Of Reaction Carrier Lube Dam, Thrust Bearing And Reaction Carrier Assembly
    GM1833142Courtesy of GENERAL MOTORS CORP.
  3. Remove the input carrier, reaction carrier lube dam (673). The dam may be stuck to the input carrier assembly.
  4. Remove the thrust bearing (674) from the reaction carrier.
  5. Remove the reaction carrier assembly (675).
scientia non olet · About LEMON Manuals