LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 4T65-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Input Clutch Housing, Input Clutch Pawl, and 3rd Clutch Pawl Assemble

Input Clutch Housing, Input Clutch Pawl, and 3rd Clutch Pawl Assemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Third And Input Clutch Pawl Assemblies Components
    GM897578Courtesy of GENERAL MOTORS CORP.
  1. Use a small screwdriver in order to align the teeth of the input clutch plate assembly and the third clutch plate assembly. This will ease installation of the clutch pawl assembly.
    2. NOTE: Make sure that the clutch pawl assembly is fully seated into the housing.
  2. Insert the combined input clutch pawl (728), third clutch pawl (727) and input sun gear (668) assembly into the input clutch housing assembly (632).
scientia non olet · About LEMON Manuals