LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 4T65-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 1-2 Support Roller Clutch Disassemble

1-2 Support Roller Clutch Disassemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Prying Thrust Bearing Off 1-2 Support Drum
    GM10612Courtesy of GENERAL MOTORS CORP.
  1. Use a small screwdriver in order to gently pry the thrust bearing (685) off of the 1-2 support drum (687).
  2. Lift the 1-2 clutch roller assembly (683) out of the 1-2 support drum.
scientia non olet · About LEMON Manuals