Typical Scan Tool Data

WARNING: This page is about a different variant/trim than selected.

EC Ignition Relay Control Ckt Open, Short Gnd, Short Volts Test Status

Circuit	Short to Ground	Open	Short to Voltage
Operating Conditions: Component commanded OFF Parameter Normal Range: The following illustrates the normal parameter state with no circuit conditions: Component OFF - OK for Open/Short Gnd test and Not Run for Short to Volts test Component ON - Not Run for Open/Short Gnd test and OK for Short to Volts test
Battery Voltage	-	Fault	-
EC Ignition Relay Control Circuit	Fault	Fault	Not Run

EC Ignition Relay Control Ckt Open, Short Gnd, Short Volts Test Status

Circuit	Short to Ground	Open	Short to Voltage
Operating Conditions: Component commanded ON Parameter Normal Range: The following illustrates the normal parameter state with no circuit conditions: Component OFF - OK for Open/Short Gnd test and Not Run for Short to Volts test Component ON - Not Run for Open/Short Gnd test and OK for Short to Volts test
Battery Voltage	-	Not Run	-
EC Ignition Relay Control Circuit	Not Run	Not Run	Fault