Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: The ECM detects engine movement by sensing the airflow through the mass air flow (MAF) sensor is more than 3 g/s, or by sensing crankshaft position sensor pulses.

The ECM detects that the starter is commanded on and the engine has been cranking for more than 4 s without a camshaft position sensor pulse.
OR
The ECM detects that the engine has started, but did not received a camshaft position sensor pulse during the first engine revolution.
OR
The ECM detects that the engine is running, but does not receive a camshaft position sensor pulse for 800 of 1,000 engine cycles.