Removal Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE: Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the line in order the avoid possible system contamination.

Fig 1: EVAP Canister Vent Solenoid Valve Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the EVAP canister vent solenoid valve electrical connector.

Fig 2: EVAP Canister Vent Solenoid Valve And EVAP Emission Canister Hose

Courtesy of GENERAL MOTORS CORP.

Disconnect the EVAP canister vent solenoid valve from the EVAP emission canister hose.

Fig 3: Identifying EVAP Canister Vent Solenoid Valve Bracket Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the EVAP canister vent solenoid valve bracket bolt.
Remove the EVAP canister vent solenoid valve.