LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission - 4T65-E - Description And Operation) >> Description and Operation >> Automatic Transmission Hydraulic Diagrams >> Overdrive Range, Second Gear >> 1-2 Accumulator Valve

1-2 Accumulator Valve

WARNING: This page is about a different variant/trim than selected.

1-2 accumulator feed fluid forced from the 1-2 accumulator is routed back to the 1-2 accumulator valve. This pressure forces the 1-2 accumulator valve against spring force and the torque signal fluid pressure to regulate the exhaust of excess accumulator fluid. This regulation provides additional control for the second clutch apply.

scientia non olet · About LEMON Manuals