LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala LS, 3.9 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission - 4T65-E - Description And Operation) >> Description and Operation >> Automatic Transmission Hydraulic Diagrams >> Overdrive Range, 4-3 Downshift - Torque Converter Clutch Not Applied >> Notes

Overdrive Range, 4-3 Downshift - Torque Converter Clutch Not Applied: Notes

WARNING: This page is about a different variant/trim than selected.

When the transmission is operating in Fourth gear, a 4-3 downshift will occur if there is a significant change (increase) in the throttle position or if the load on the engine is increased. When the 4-3 downshift occurs, the torque converter clutch will release prior to the shift occurring which results in the following changes in the hydraulic system:

scientia non olet · About LEMON Manuals